Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Tufflor - Concrete Floor Paint

Reprotec Tufflor 

"Industrial strength epoxy concrete floor paint, Industrial Flooring made to last."


Reprotec Tufflor is a two pack Epoxy coating which provides protective and decorative properties to concrete, steel and other substrates.

The material is supplied as a two pack system, comprising pre-weighed amounts of BASE and CURING AGENT.  After mixing together, an easily applied chemical and abrasion resistant finish is produced.  Reprotec Tufflor is  a concrete floor paint that has been designed for Factory Floors and areas of high use it has been widely used  and specified in the Automotive and Aerospace sectors, where a clean tough working environment is essential to fit with the industry quality standards.


Typical Uses

As a tough, hard wearing, abrasion resistant floor paint in manufacturing  areas, showrooms, trafficked warehouse areas, food preparation areas, breweries, abattoirs, bottling factories, etc.



  • Solvent free, low odour
  • Very good chemical resistance
  • Excellent adhesion to concrete
  • High build
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned


Typical Properties

Pot life @ 20°C: 45 Minutes

             @ 10°C: 90 Minutes

Colours: Red Cherry 04D45Blue Sky RAL 5015Auto Blue 20E51, Silver Grey RAL 7001Iron Grey RAL 7011, Auto Grey 10A07Leaf Green RAL 6002Oxide Red RAL 3009Safety YellowBlack.


Coverage:  0.25-0.30kg/m²/coat

Tack free time @ 20°C:  6 hours

Hard dry time@ 20°C:  10 hours

Full chemical resistance @ 20°C:  7 days

Adhesion strength to concrete:  3.9 MPa (concrete failure)

Adhesion strength to mild steel:  >12 MPa

Chemical resistance:  excellent resistance to dilute acids, dilute alkalis, oil, petrol, diesel, vegetable oils, raw sewage etc




Reprotec Tufflor is supplied in 5kg  packs

Reprotec Tufflor is also supplied in 15kg  packs in two colours only:-

Auto Blue 20E51, and  Auto Grey 10A07


 A 5kg pack is sufficient to treat 16/20 m2 of surface area per coat we recommended a two coat treatment using either Reprotec Florprime as the first coat followed by Reprotec Tufflor, or two coats of Reprotec Tufflor, providing an overall d.f.t. of 400-500 microns. (0.4 -0.5 mm.). It is possible on a good floor that one coat of Reprotec Tufflor will give you the desired finish.

Reprotec Tufflor should be applied strictly in accordance with the manufacturer’s instructions.

(Watch a sample video on how to mix two pack resins.)

Please print off and refer to the mixing and application sheet below

 Technical Data Sheet

Please refer to Material Safety Data Sheet below for additional information

 MSDS Data Sheet


Clean Tools with Reprotec Toolclean

Back to the homepage of :-


.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any us at....

Latest Tweets