for wooden walkways where the look of the wood needs to be retained.
Marble and tile can be made anti slip while the natural beauty is retained.
Suitable for making GRP panels anti slip e.g. boat / boats and yachts again whilst retaining the original look.
Reprotec Supaseal is a two pack epoxy polyamine that provides a glossy, tack free surface, even under conditions of high humidity, and is effectively non-yellowing under the influence of UV light. The product cures rapidly and is a versatile, chemical resistant sealer/clear coating for a number of substrates.
Suitable for Interior or Exterior projects.
As a clear coating for concrete floors, ideal for garages, car parks and where you wish to retain the concrete look.
Appearance: Clear liquid of low odour
Viscosity: 350-400cps @ 20°C
Pot Life: 25-30 minutes @ 20°C
Tack free time: 8 hours @ 20°C
Hard dry time: 14 hours @ 20°C
Full chemical resistance: 7 days @ 20°C
Chemical Resistance: Excellent resistance to dilute acids and alkalis, oil, petrol, diesel and vegetable oils.
Coverage: Will be dependant on the porosity of the concrete but should be between 15 to 30 m2 per 5Kg Pack.
On most woods two coats will probably be required depending on the porosity of the wood. Good concrete and stone should only need one coat, porous concrete will need two coats.
***Top Tip - For the Anti Slip version do not apply to thick - if you do, you may lose the anti-slip properties - you should be able to visually identify the anti slip aggregate during application ***
Reprotec Supaseal is supplied in 5kg packs.
Reprotec Supaseal Anti Slip is supplied in 5.25Kg Packs
If anti slip is required make sure the correct product on the drop down box is ordered.
Reprotec Supaseal shall be applied strictly in accordance with the manufacturer’s instructions.
Please print off and refer to the mixing and application instructions below.
Please refer to Material Safety Data Sheet below for additional information.