Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Stoneseal

Description

Reprotec Stoneseal. Do not confuse Reprotec Stoneseal with an ordinary stone sealer this product contains high specification polymers, which not only impregnates porous surfaces and imparts a transparent barrier against oil and water, but it also imparts stain release characteristics to the substrate providing an almost self cleaning substrate. It does not alter the appearance of the substrate or its vapour permeability. It also functions as a water, oil and stain repellent on non-porous surfaces. If you love the way your stone looks when it's new use Reprotec Stoneseal to keep it that way. Reprotec Stoneseal will protect stone from water ingress, pollution, vegetation, algae and staining keeping your surface looking like new for years to come, saving you energy, time and money.

For Stone renovation simply clean the stone by water jet or similar, allow to dry and apply Reprotec Stoneseal - Your stone will be as good as new and stay that way.

 

Typical Uses

Reprotec Stoneseal is suitable for sealing natural stone, concrete, marble, terracotta; paving stones, patio areas, marshall's type reconstituted stone, granite, clay, slate and unglazed tile, and may be applied to both vertical and horizontal surfaces.                                                                  

Advantages                                                                         

  • Ÿ  Outstanding resistance to water.              
  • Ÿ  Oil, grease and dirt repellent.
  • Ÿ  Resistant to ageing and weathering.
  • Ÿ  Suitable for concrete, stone, terracotta, marble,   
  •   Granite, clay, slate and unglazed tile.
  • Ÿ  Abrasion resistant.
  • Ÿ  Fast drying, single pack.
  • Ÿ  Non-toxic.
  • Ÿ  No effect on gas permeability

Ÿ 

Ÿ  No change to substrate appearance.

 

Typical Properties

Appearance:         Pale amber translucent liquid.

Coverage:             2 - 6m²/Ltr

Drying Times:       Touch dry after 1 hour @ 20°C

                              Hard dry after 2 hours @ 20°C

PH:                         5

Flashpoint:            >93°C

 

Resistant to staining by cola, coffee, motor oil, anti-freeze, brake fluid, etc.

 

Packaging

Reprotec Stoneseal is supplied in  5Ltr  and 25 Ltr Packs.

 

Apply Reprotec Stoneseal by brush or roller at a rate of 5m²/litre and allow to dry.
A second coat may be necessary for particularly absorbent 
surfaces. This may be applied after the first coat has dried 
for a minimum of 2 hours. Allow to dry for 24 hours 
before service. 

 

Reprotec Stoneseal shall be applied strictly in accordance with the manufacturer’s instructions.

Please print off and refer to the Technical Data Sheet

 Technical data Sheet

 Please refer to Material Safety Data Sheet below for additional information.

 

Back to the homepage of :-



.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any discounts......contact us at.... sales@reprotecuk.co.uk

Latest Tweets