Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Steelcoat Finish

Description

Reprotec  Steelcoat is a high performance, water dispersible Epoxy coating for the treatment of steel. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application.

Reprotec  Steelcoat may be easily applied by brush or roller to provide a durable, abrasion and chemically resistant coating of excellent integrity.

Typical Uses

As a finish for steel in food factories, abattoirs, dairies, laboratories etc.

As a chemically resistant coating for steelwork in bund areas.

As an anti-graffiti coating.

As a hygienic, easily cleanable surface on most metallic surfaces, not recommended for galvanised steel.

Advantages

  • May be applied in damp conditions
  • Available in a range of colours
  • Low odour
  • Easily applied
  • Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents.
  • Very good adhesion to steel
  • Hygienic and easily cleaned.

Typical Properties

Pot life @ 20C: 90 Minutes

             @ 10C: 150 Minutes

Colours: Red Cherry 04D45Blue Sky RAL 5015Auto Blue 20E51, Silver Grey RAL 7001Iron Grey RAL 7011, Auto Grey 10A07Leaf Green RAL 6002Oxide Red RAL 3009Safety YellowBlack. and White

         

Application Temperatures     

minimum = 3°C

maximum = 30°C

Coverage:  0.20-0.25kg/m²/coat

Volume Solids:  65%

Temperature resistance:  75°C (dry), 65°C(wet)

Chemical resistance:  excellent resistance to water, dilute acids, dilute alkalis, glycol ethers, dibasic ester solvent, skydrol, etc.  Please consult our Technical Department for specific advice.

 

Packaging

Reprotec  Steelcoat  is supplied in 5Ltr packs.

Procedure

Surface Preparation

Suitable mechanical treatment, such as grit blasting,

Wire brushing etc is recommended to ensure a clean, uncontaminated substrate.

Priming

A primer coat of Reprotec  Steelcoat Primer is recommended at all times. 

Mixing

Pour the contents of the BASE container into the CURING AGENT container and thoroughly mix, preferably by mechanical means (see website for suitable accessories) until a uniform colour is achieved.

(Watch a sample video on how to mix two pack resins.)

The mixed material may be thinned by the addition of up to a maximum of 10% by volume of clean, potable water.

Application

Apply by brush, roller at a nominal rate of 0.20 to 0.25kg/sq.m. per coat equivalent to a dry film thickness of 100-125 microns.

A minimum two coat treatment is recommended, applying subsequent coats after a minimum interval of 16 hours curing.  Ensure good ventilation after application, as this speeds up the physical drying stage of the curing process.


Equipment Cleaning

Clean equipment with water prior to curing of the coating.

If the coating has cured use Reprotec Toolclean

Please print off and refer to technical data sheet below.

 Technical Data Sheet

For additional Safety Information read the material safety data sheet below.

  MSDS Sheet

 

Back to the homepage of :-



.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any discounts......contact us at.... sales@reprotecuk.co.uk

Latest Tweets