Reprotec Paverseal is a single pack, solvent-borne, clear Acrylic resin based curing compound, surface sealer and dust proofer for concrete, block paving, terracotta tile etc.
When applied to new block paving it will prevent the ingress of moisture and dirt into the Paver maintaining that new look significantly longer and protecting the pavers from the ravages of winter.
When applying to old pavers, we recommend that you power wash the Pavers first before treating with the Reprotec Paverseal and you will enjoy a rejuvenated "new look" driveway.
When applied to freshly placed concrete, Reprotec Paverseal functions as a curing membrane, reducing any tendency towards drying shrinkage cracks.
At the same time the surface becomes sealed against the ingress of oils and many aqueous chemicals, and a harder wearing floor is produced.
When applied to old/aged concrete floors, Reprotec Paverseal penetrates into the pore structure thereby sealing and dust proofing the surface.
As a curing/sealing treatment to new concrete.
As a sealing/dust proofing treatment to old concrete and blocks to provide a sealed and dust-proof surface with resistance to the ingress of oil, petrol and chemical spillages.
Appearance: Pale straw coloured liquid with characteristic odour
Drying time @ 20°c:
Tack free 2-4 hours
Hard dry 16-24 hours
Flash point: 40°c
Chemical resistance: Resistant to spillages of dilute mineral acids, caustic alkali solutions, vegetable oils, de-icing salts, etc.
Reprotec Paverseal is supplied in 5 and 25L packs.
Coverage is very much dependent on the porosity of the substrate.
Storage and Shelf Life
Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C.
Reprotec Paverseal has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions.
Apply only in well ventilated areas.
Do not apply externally if rain is likely during application or within 6 hours thereafter.
Health and Safety
Reprotec Paverseal is a flammable material (flash point = 40°c)
Avoid contact of the material with skin and eyes.
Provide good ventilation during application and wear suitable organic vapour respirators.
Reprotec Paverseal shall be applied strictly in accordance with the manufacturer’s instructions.