Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Kerbfix

Reprotec Kerbfix

Super Strength Epoxy Bedding Mortar

Description

Reprotec Kerbfix is a thixotropic, solvent free Epoxy bedding mortar ideal for bonding a wide range of building materials to one another e.g. concrete, brick, metal, stone and wood.

Reprotec Kerbfix has a high level of mechanical integrity and exhibits excellent bonding characteristics even under damp conditions.

Reprotec Kerbfix is easy to mix and apply and requires no primer.

Reprotec Kerbfix is specifically formulated for bedding in and bonding kerbs and blocks to concrete and other such surfaces. Provides a very high strength bond for fixing bund walls to concrete  floors. Fixes kerbs in place where they would otherwise be dislodged by vehicles or forklifts. 

 

Typical Uses

Reprotec Kerbfix is a versatile thixotropic mortar being particularly suitable for bedding tiles and fixing brick slips to concrete

Reprotec Kerbfix may also be used for thin section concrete repairs and bolt fixing in walls or overhead.

 

Advantages

  • High Strength
  • Excellent adhesion to most building materials
  • Bonds to damp substrates
  • Low odour
  • Non-slump
  • Thixotropic nature facilitates application in both vertical and overhead locations
  • Very good chemical properties and cohesive strength
  • Resistant to water, weathering and a wide range of chemicals
  • No primer required
  • Creep resistant
  • Easy to trowel

 

Typical Properties

Pot life @ 20C: 50 Minutes

Colour: Light Grey

Specific Gravity:  1.5g/cm³

Compressive Strength:  30MPa (1 day @ 20°C)

                                       60MPa (7 days @ 20°C)

Tensile Strength:  8N/mm²

Moisture resistance:  <0.4% increase @ 28 days

                                   (BS 6319: part 8)

Lap Shear Strength to grit blasted steel: 12MPa.

Shrinkage on curing:  Negligible

Hold up:  >15mm

Application temperature range: 3°C-40°C                      

 

Packaging

Reprotec Kerbfix is supplied in 10kg packs, each of which yields 5.7 litres of mortar.

 

Coverage

A 10kg pack yields 5.7 litres of mortar, sufficient to cover 2.85m² at a thickness of 2mm.

 

Reprotec Kerbfix shall be applied strictly in accordance with the manufacturer’s instructions

Please print off and refer to the mixing and application sheet below

 Technical data sheet

Please refer to Material Safety Data Sheet for additional information

   MSDS Information


Clean Tools with Reprotec Toolclean

Back to the homepage of 

 

.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any discounts......contact us at.... sales@reprotecuk.co.uk

Latest Tweets