Reprotec UK - Epoxy Floor Paint - Coatings for Industry Sales Number: 0191 300 9989

Reprotec Easiwall

 

Reprotec Easiwall

"Very easy to clean, a tough hygienic chemical resistant finish"

Description

Reprotec Easiwall  for a clean, hygienic, hard wearing finish.

Reprotec Easiwall Coating is a high performance, water dispersible Epoxy coating for the treatment of concrete walls, block and render. It can also be used to refurbish ceramic tile areas . It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application.

Reprotec Easiwall Coating may be easily applied by brush or roller, to provide a decorative, abrasion and chemically resistant hygienic coating of excellent durability.

Any holes in the existing wall should be remedied by using Reprotec Renderlite

As the name suggests this product is easy to use, almost no smell, no solvents and the ability to clean utensils in water.

 Typical Uses

As a wall coating in food factories, abattoirs, dairies, laboratories , garages, factories, warehouses, ceramic tiles etc.

Advantages

May be applied to dry or damp surfaces

  • Available in a range of colours
  • Low odour
  • Easily applied
  • Excellent resistance to water, oils, blood, animal fats, detergents, chemical cleaners etc
  • Very good adhesion
  • Hygienic and easily cleaned.

 

Typical Properties

Pot life @ 20C: 90 Minutes

             @ 10C: 150 Minutes

Application Temperatures      minimum = 3°C

                                               maximum = 30°C

Coverage:  0.20-0.25kg/m²/coat

Colours: Red Cherry 04D45, Blue Sky RAL 5015, Auto Blue 20E51, Silver Grey RAL 7001, Iron Grey RAL 7011, Auto Grey 10A07Leaf Green RAL 6002, Oxide Red RAL 3009, Safety Yellow, Black. white

          

Packaging

 Reprotec Easiwall Coating  is supplied in 5kg packs

which should cover between 20/25m² per coat per pack

This is around £3 per square metre on a decent wall, per coat.

one coat may be sufficient on a dense or previously coated wall - two coats are recommended. (first coat can be thinned with 5% clean water).

 

Curing

Allow to cure for a minimum of 24 hours @ 20°C

7 days cure @ 20°C is recommended prior to exposure to chemicals.

Good ventilation is essential for satisfactory curing of the coating.

Lower temperatures will extend the curing time.

Coverage

2 Coats are recommended a 5Kg pack is sufficient to treat 20 - 25 m2 of surface  per coat , with the recommended two coat treatment, providing an overall d.f.t. of 200-250 microns. 

Limitations

Do not apply to wet or uncured concrete surfaces. 

Do not apply at temperatures of 3°C or less.

In poorly ventilated areas forced extraction must be provided.

 

Reprotec Easiwall Coating shall be applied strictly in accordance with the manufacturer’s instructions.

(Watch a sample video on how to mix two pack resins.)

Please print of and refer to mixing and application instructions below

  Reprotec Easiwall Technical Data Sheet

 

Please refer to Material Safety Data Sheet for additional information.

   MSDS information

 

Clean Tools with Reprotec Toolclean




.......0191 300 9989..... ....Technical Help Line....

We manufacture high quality epoxy floor and wall paints, concrete repair materials and anti slip products. All Prices shown are excluding VAT. This will be added at checkout after any discounts......contact us at.... sales@reprotecuk.co.uk

Latest Tweets