Reprotec Easiflor Coating is a high performance, water dispersible Epoxy coating for the treatment of concrete floors. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application.
Reprotec Easiflor Coating may be easily applied by brush or roller, to provide a decorative, abrasion and chemically resistant coating of excellent durability.
As the name suggests this product is an absolute doddle to use, so although it is designed for Industrial use, its ease of use will lend itself to be utilised in domestic situations such as garages/workshops etc., where it can transform the "look" of the surroundings, it is resistant to petrol, diesel, anti freeze, hydraulic oil, de-icing salts and will give a pleasing dust free finish.
Suitable for Interior or Exterior projects
As a floor coating for a food factory, abattoir, dairy, laboratory , garage , warehouse etc.
May be applied to dry or damp surfaces
Pot life @ 20C: 90 Minutes
@ 10C: 150 Minutes
Application Temperatures minimum = 3°C
maximum = 30°C
Colours:Red Cherry 04D45, Blue Sky RAL 5015, Auto Blue 20E51, Silver Grey RAL 7001, Iron Grey RAL 7011, Auto Grey 10A07, Leaf Green RAL 6002, Oxide Red RAL 3009, Safety Yellow, Black. also available in white.
Reprotec Easiflor Coating is supplied in 5kg packs
which should cover between 20/25m² per coat per pack
This is around £3 per square metre on a reasonable floor per coat.
one coat may be sufficient on a good floor - two coats are recommended. (first coat can be thinned with 5% clean water).
Allow to cure for a minimum of 24 hours @ 20°C prior to light foot traffic access and 48 hours @ 20° prior to vehicular trafficking.
7 days cure @ 20°C is recommended prior to exposure to chemicals.
Good ventilation is essential for satisfactory curing of the coating.
Lower temperatures will extend the curing time.
2 Coats are recommended a 5Kg pack is sufficient to treat 20-25 m2 of surface per coat - the recommended two coat treatment will provide an overall d.f.t. of 200-250 microns.
Do not apply to wet or uncured concrete surfaces.
Do not apply at temperatures of 3°C or less.
In poorly ventilated areas forced extraction must be provided.
Reprotec Easiflor Coating shall be applied strictly in accordance with the manufacturer’s instructions.
Watch a video of Reprotec Griplite being applied as an anti slip finish over Reprotec Tufflor. The mixing and rolling techniques are the same for both these products and Reprotec Easiflor, the difference being the anti slip finish.
Please print off and refer to the mixing and application sheet below
Please print of and refer to mixing and application instructions below
Reprotec Easiflor Technical Data Sheet
Please refer to Material Safety Data Sheet for additional information.
Clean Tools with Reprotec Toolclean