Reprotec Floor Doctor Rapid will have hardened sufficiently after 5-6 hours cure @ 15-20°C to allow full trafficking.
Reprotec Floor Doctor Rapid is a high strength, trowel applied, two component Epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
Reprotec Floor Doctor Rapid is a blend of Epoxy resin, Polyamine curing agent, graded aggregate and colour pigments. The mixed material is applied to a suitably prepared surface, and quickly cures to form a durable, abrasion and chemical resistant repair. ** You do not require a primer with this product **
Repairs to spalled or damaged concrete; chemical bunds; bedding pre-cast concrete beams; nosings on expansion joints; floor repairs, forming coves.
Pot Life: 40 minutes @ 20°C
Adhesion to concrete: 3.9MPa (concrete failure)
Compressive Strength: 76MPa
Taber abrasion resistance: 40mg weight loss (CS17 wheels; 1kg loads, 1000 cycles)
Maximum Service Temperature: 70°C continuous
Reprotec Floor Doctor Rapid is supplied in 5kg and 10kg packs.
A 5kg pack of Reprotec Floor Doctor Rapid yields 2.5 litres of material, sufficient for 0.5m² @ 5mm thickness.
(10kg pack pro-rata).
Reprotec Floor Doctor Rapid shall be applied strictly in accordance with the manufacturer’s instructions
Please print off and refer to the mixing and application sheet below.
Please refer to Material Safety Data Sheet below for additional information.